Gert van Dijk <github@gertvandijk.net>: Author Summary

Builds triggered by Gert van Dijk <github@gertvandijk.net>

Builds triggered by an author are those builds which contains changes committed by the author.
7
0 (0%)
7 (100%)

Breakages and fixes

Broken means the build has failed but the previous build was successful.
Fixed means that the build was successful but the previous build has failed.
0 (0% of all builds triggered)
0 (0% of all builds triggered)
0
Build Completed Code commits Tests
OZW › ODB › #164 8 months ago
Update configuration descriptions for Qubino Smart Plug 16A (ZMNHYDx) (#2067)

- Fix typo 'disbale' -> 'disable'
- Fix '2 and 6 combined' to '2 and 3 combined', as 6 would refer to itself.
  (It is '2 and 3' as per Qubino user manual.)
- Improve sentence in parameter 52.
Update configuration parameter descriptions for Aeotec ZW175 (#2065)

I own a few of these devices (with firmware 1.02) and found the
configuration applied did not match the description in Open-Zwave.

- Parameter 101 controls the periodic power reporting. The description
  before this change was all wrong. The Aeotec manual updated November 2019
  [1] appears to be wrong about bits 2 & 3 (values 4 and 8); they seem
  reversed in practice.
- Parameter 111 controls the interval for the periodic power reporting. The
  Aeotec manual updated November 2019 [1] mentions that the minimal
  interval is 30 seconds, not 600. The factory default is 600, though.

[1]: https://aeotec.freshdesk.com/support/solutions/articles/6000219911-smart-switch-7-user-guide-
     (version "Modified on: Wed, 13 Nov, 2019 at 10:45 PM")
Update Hank HKZW-MS02 configuration parameter 18 description (#2066)

According to the product manual, this parameter controls how much
*additional* delay will be used to control directly associated devices, and
it has nothing to do with a luminance level (this is not a luminance
sensor).
700 passed
OZW › OZWMAC › #744 9 months ago
Update Hank HKZW-MS02 configuration parameter 18 description (#2066)

According to the product manual, this parameter controls how much
*additional* delay will be used to control directly associated devices, and
it has nothing to do with a luminance level (this is not a luminance
sensor).
Update configuration parameter descriptions for Aeotec ZW175 (#2065)

I own a few of these devices (with firmware 1.02) and found the
configuration applied did not match the description in Open-Zwave.

- Parameter 101 controls the periodic power reporting. The description
  before this change was all wrong. The Aeotec manual updated November 2019
  [1] appears to be wrong about bits 2 & 3 (values 4 and 8); they seem
  reversed in practice.
- Parameter 111 controls the interval for the periodic power reporting. The
  Aeotec manual updated November 2019 [1] mentions that the minimal
  interval is 30 seconds, not 600. The factory default is 600, though.

[1]: https://aeotec.freshdesk.com/support/solutions/articles/6000219911-smart-switch-7-user-guide-
     (version "Modified on: Wed, 13 Nov, 2019 at 10:45 PM")
Update configuration descriptions for Qubino Smart Plug 16A (ZMNHYDx) (#2067)

- Fix typo 'disbale' -> 'disable'
- Fix '2 and 6 combined' to '2 and 3 combined', as 6 would refer to itself.
  (It is '2 and 3' as per Qubino user manual.)
- Improve sentence in parameter 52.
Testless build
OZW › OZWLNX › #1343 9 months ago
Update Hank HKZW-MS02 configuration parameter 18 description (#2066)

According to the product manual, this parameter controls how much
*additional* delay will be used to control directly associated devices, and
it has nothing to do with a luminance level (this is not a luminance
sensor).
Update configuration descriptions for Qubino Smart Plug 16A (ZMNHYDx) (#2067)

- Fix typo 'disbale' -> 'disable'
- Fix '2 and 6 combined' to '2 and 3 combined', as 6 would refer to itself.
  (It is '2 and 3' as per Qubino user manual.)
- Improve sentence in parameter 52.
691 passed
OZW › OO › #34 9 months ago
Update configuration descriptions for Qubino Smart Plug 16A (ZMNHYDx) (#2067)

- Fix typo 'disbale' -> 'disable'
- Fix '2 and 6 combined' to '2 and 3 combined', as 6 would refer to itself.
  (It is '2 and 3' as per Qubino user manual.)
- Improve sentence in parameter 52.
Testless build
OZW › OO › #33 9 months ago
Update Hank HKZW-MS02 configuration parameter 18 description (#2066)

According to the product manual, this parameter controls how much
*additional* delay will be used to control directly associated devices, and
it has nothing to do with a luminance level (this is not a luminance
sensor).
Testless build
OZW › OZWLNX › #1342 9 months ago
Update configuration parameter descriptions for Aeotec ZW175 (#2065)

I own a few of these devices (with firmware 1.02) and found the
configuration applied did not match the description in Open-Zwave.

- Parameter 101 controls the periodic power reporting. The description
  before this change was all wrong. The Aeotec manual updated November 2019
  [1] appears to be wrong about bits 2 & 3 (values 4 and 8); they seem
  reversed in practice.
- Parameter 111 controls the interval for the periodic power reporting. The
  Aeotec manual updated November 2019 [1] mentions that the minimal
  interval is 30 seconds, not 600. The factory default is 600, though.

[1]: https://aeotec.freshdesk.com/support/solutions/articles/6000219911-smart-switch-7-user-guide-
     (version "Modified on: Wed, 13 Nov, 2019 at 10:45 PM")
691 passed
OZW › OO › #32 9 months ago
Update configuration parameter descriptions for Aeotec ZW175 (#2065)

I own a few of these devices (with firmware 1.02) and found the
configuration applied did not match the description in Open-Zwave.

- Parameter 101 controls the periodic power reporting. The description
  before this change was all wrong. The Aeotec manual updated November 2019
  [1] appears to be wrong about bits 2 & 3 (values 4 and 8); they seem
  reversed in practice.
- Parameter 111 controls the interval for the periodic power reporting. The
  Aeotec manual updated November 2019 [1] mentions that the minimal
  interval is 30 seconds, not 600. The factory default is 600, though.

[1]: https://aeotec.freshdesk.com/support/solutions/articles/6000219911-smart-switch-7-user-guide-
     (version "Modified on: Wed, 13 Nov, 2019 at 10:45 PM")
Testless build
Build Completed Code commits Tests
Build Completed Code commits Tests